Pool pump Brisbane
Pool pump Brisbane
WHAT IS A SWIMMING POOL PUMP USED FOR?
The filtration is the "lung" of your installation and has the task to refine your pool water. The essential function of the pump is to circulate the water in the basin and the lines. It is an important element, and even essential. It is the "heart" of your pool.
It is the pump that sets the water in motion. It sucks it in through the skimmers or the bottom drains of the basin or the support tank (on account of an infinity pool or mirror).
The pump then passes the water through the filter ( cartridge , sand , diatoms, etc.) to free it of impurities, and yet again injects it via the conveyance spouts .
WHAT IS A SWIMMING POOL PUMP?
A swimming pool pump is a pre-filter, a pump body, a motor The pump consists of 3 parts:
The pre-filter : placed at the front of the pump, gets water directly from your pond, it collects and squares the coarsest dirt, leaves, twigs... which could damage the pump. Its transparent cover makes it conceivable to actually look at the state of dirtying.
The pump body is made up of a turbine system that assists the movement of water.
The motor drives the pump impeller and allows water to circulate. He is the main actor in cleaning your swimming pool. It sets the water in motion, injects it into the filtration system, prior to allowing it to be returned to the basin through the conveyance spouts.
The pool pump allows water to circulate in the hydraulic system and in the pool.
HOW TO CHOOSE YOUR SWIMMING POOL PUMP?
Contingent upon the characteristics of the pool
The volume of your pool : your entire pool must be filtered in 6 hours. You just have to partition the volume of your pond by 6, and you will have an approach of the useful progression of your pump.(zodiac chlorinator)
The length of your lines or the distance between your pool and the technical room: the water operates in a shut circuit, in and out. The longer the suction and discharge distance, the more remarkable and efficient the pump must be (you must proportion the filter according to the force of the latter). The distance between the swimming pool and the pump must be as short as conceivable, with at least elbows (diminishes and dials back the circulation of water).
The lines must have a sufficient diameter to allow water to circulate rapidly and in large volumes. As a general guideline, for an above-ground swimming pool, you have Ø 40 lines, for a traditional swimming pool Ø 50 lines, for a volume of 100 m³ of Ø 63 lines.
Diagram of the water circuit funneling of a swimming pool The pump ought to be placed as close as conceivable to the pool. The farther it is, the more difficult it will be to get the water, and to reinject (it will then be necessary to oversize the pump and the filter, etc.).
The distinction in level between the room and the swimming pool has an impact on the tension drop .
As far as conceivable, place your pump beneath the water level of your swimming pool to avoid stopping (20 or 30 cm is sufficient).
Your filtration ( sand filter , diatomaceous earth filter, zeolite filter or cartridge filter ): a few pumps are not compatible with certain types of filtration. It will be more efficient if your filter is clean.
The treatment of your water :
A few pumps are not compatible with salt or PHMB.
If the prefilter front of your pump is made of polycarbonate, treatment with PHMB isn't recommended.
A sufficient number of conveyance spouts to have the option to absorb the conveyance stream of your pump.
Professional tip:
As a general principle, the force of the pump is calculated according to the volume of water in your swimming pool separated by 6, gathered together to the next unit, increased by 20 or 30% to take into account the various constraints.https://kausoksila-attiki.gr
Example: you have a basin 8 x 4 x 1.50 profound, the volume is 48 m³.
48 m³: 6 hours (complete filtration time of your pool) = 8m³/hour
Then, you apply an increase of 20%, connected to the tension drop 8m³/hour x 20% = 9.6 m³
You will pick a pump with a base progression of 9.6 m³/h
The pump is popular, in fairly difficult conditions (humidity, salt, heat, etc.), it must therefore be perfectly estimated for your pool and its constraints.
Contingent upon the cost:
The cost of the pumps is variable, It relies upon the accompanying characteristics.
Its power and stream,
In case it is single-phase or three-phase,
In the event that it has one, two or three paces,
In case it is of reputable brand,
In case it is innovative,
It is one of the most stressed elements of your installation. It is certain that it will be subjected to difficult conditions (humidity, chemicals, intensive operation, etc.). It is important to pick it carefully and not to hesitate to bring into play the investment/robustness/safety/reliability ratio.
Adapt your pump to your necessities. next blog